Inspecting, fork lift device setUse this procedure to inspect the fork lift device set.NoteActionDANGERTurn off all:• electric power supply• hydraulic pressure supply• air pressure supplyto the robot, before entering the robot working area.1Check the fork lift devices for damage.2Check attachment screws for deformation and othertype of damage.3Make sure fork lift device set is properly attached.4Correct tightening torque, fork lift devices:• 280 NmArt. no. is specified in Requiredequipment on page 130.If any damage is detected, the fork lift device andattachment screws must be replaced!Correct attachment screws:• M12x70 quality 12.9 Gleitmo 603 (2 pcs peradditional mechanical stop)53HAC044266-001 Revision: - 133© Copyright 2013 ABB. All rights reserved.3 Maintenance3.3.12 Inspecting the fork lift device setContinued
