NoteActionWipe clean the contact surfaces from any remain-ing contamination.3Also wipe clean the o-ring groove.O-ring, 3HAB3772-107xx1200001019Check the o-ring.Replace if damaged!4xx1200001020Make sure the o-ring is seated in the groove.TipLubricate the o-ring with some grease for a betterfitting in the groove.5xx1200001135Remove the cover, if the motor is a new sparepart.6Securing the axis-3 motorUse this procedure to secure the motor.NoteActionFit guide pins in opposite holes.1Continues on next page412 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.4 Repair4.7.3 Replacing the axis-3 motorContinued
