NoteActionTightening torque: 200 Nmxx1200001279Secure the shaft with screw and washer.9xx1200001278Fit the VK-cover.10Grease: 3HAC042534-001xx1300000783Unscrew both screws in link ear and fill the bear-ing with grease from the upper hole until thegrease appears in the lower hole.11Refit the two screws and wipe clean from residualgrease.12Concluded refitting of the front shaftNoteActionRemove the lifting accessory from the bal-ancing device.1Continues on next page3HAC044266-001 Revision: - 501© Copyright 2013 ABB. All rights reserved.4 Repair4.8.2 Replacing the axis-2 gearboxContinued
