NoteActionO-ring, axis-5, 3HAB3772-110xx1200001021Check the o-ring on the motor.Replace if damaged!4xx1200001013Refit the motor cover with its attachmentscrews.NoteDo not refit the screws that will hold theheat protection plate at this point.NoteDo not reuse the self-threading attachmentscrews! Replace with standard attachmentscrews. The threads will otherwise bedamaged.NoteMake sure the o-ring is undamaged andproperly fitted!5xx1300000490Fit the heat protection plate with the re-maing screws.6Continues on next page230 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.4 Repair4.4.2 Refitting the cable harnessContinued
