Attaching the lifting accessoriesUse this procedure to attach the lifting accessories to the upper arm.NoteActionLifting eye: 3HAC16131-1xx1200001133Fit a lifting eye to the wrist.1Lifting eye: 3HAC16131-1Fit a lifting eye in the arm house, with afender washer underneath.2Fender washer: Outer diameter: minimum26 mm, hole diameter: 13 mm, thickness:3 mm.xx1200001134CAUTIONThe complete upper arm (including thewrist) weighs 200 kg.All lifting accessories used must be sizedaccordingly!3Lifting accessory (chain): 3HAC15556-1xx1200001308Attach the upper arm lifting accessory toan overhead crane (or similar) and then tothe lifting eye in the arm house and in thewrist.4Raise the lifting accessories to take theweight of the upper arm.5Continues on next page3HAC044266-001 Revision: - 257© Copyright 2013 ABB. All rights reserved.4 Repair4.5.1 Replacing the upper armContinued
