NoteActionxx1200001072Use caution and lift the motor straight upto get the pinion away from the gear.8Disconnect the 24 VDC power supply.9Put the motor somewhere safe.10Refitting the axis-1 motorThese procedures describes how to refit the motor.Preparations prior to refitting motorNoteActionDANGERMake sure that all supplies for electrical power,hydraulic pressure, and air pressure are turnedoff.1Remove old paint residues and other contamina-tion from the contact surfaces on both motor andgearbox.2Wipe clean the contact surfaces from any remain-ing contamination.3Also wipe clean the o-ring groove.Continues on next page390 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.4 Repair4.7.1 Replacing the axis-1 motorContinued
