NoteActionxx1200001066Connect the motor cables.Connect in accordance with the markingson the connectors.3O-ring, axis-1: 3HAB3772-111Check the o-ring.4O-ring, axis-2: 3HAB3772-111Replace if damaged!O-ring, axis-3: 3HAB3772-111O-ring, axis-4: 3HAB3772-110xx1200001070Wipe clean o-ring and o-ring groove.5Refit the o-ring.6xx1200001135Refit the motor cover with its attachmentscrews.NoteDo not reuse the self-threading attachmentscrews! Replace with standard attachmentscrews. The threads will otherwise bedamaged.NoteMake sure the o-ring is undamaged andproperly fitted!7Make sure that the covers are tightlysealed.8Continues on next page3HAC044266-001 Revision: - 221© Copyright 2013 ABB. All rights reserved.4 Repair4.4.2 Refitting the cable harnessContinued
