NoteActionxx1300000782Apply locking liquid (Loctite 2701) on the threadsof the screw, first entering the threads in theframe.8Tightening torque: 200 Nmxx1200001279Secure the shaft with screw and washer.9xx1200001278Fit the VK-cover.10Grease: 3HAC042534-001xx1300000783Unscrew both screws in link ear and fill the bear-ing with grease from the upper hole until thegrease appears in the lower hole.11Refit the two screws and wipe clean from residualgrease.12Continues on next page3HAC044266-001 Revision: - 365© Copyright 2013 ABB. All rights reserved.4 Repair4.6.2 Replacing the balancing deviceContinued
