NoteActionGuide pin, M16x150: 3HAC13120-2Apply guide pins in opposite holes in thegearbox.NoteMake sure that the guide pins are fitted inthe correct holes in the gearbox! See fig-ures!4Guide pin, M16x200: 3HAC13120-3Always use guide pins in pairs!Position of guide pin one:xx1300000822TipLubricate the guide pins with some greaseto make the frame slide better.Position of guide pin two:xx1300000823Aligning tool: 3HAC046645-001Put som grease on the o-ring of the aligningtool.5Put some grease on the part of the aligningtool that will mate with the hole in thegearbox.6Also put some grease in the matching holein the gearbox.Continues on next page466 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.4 Repair4.8.1 Replacing the axis-1 gearboxContinued
