NoteActionThe level is measured at the fill hole.xx1200000957Inspect the oil level.6Required oil level is: 0 - 10 mm below theoil plug hole.See Inspecting the oil level in axis-4 gear-box on page 111.Tightening torque: 24 NmRefit the oil plug.7DANGERMake sure all safety requirements are metwhen performing the first test run. Theseare further detailed in the section DANGER- First test run may cause injury or damage!on page 44.8156 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.3 Maintenance3.4.5 Changing oil, axis-4 gearboxContinued
