NoteActionxx1200000952Inspect the oil level at the vent hole (levelplug).6Required oil level is: 0 - 10 mm below theoil plug hole.More information is found in Inspecting theoil level in axis-2 gearbox on page 108.Remove the oil dispenser and refit theprotective cap to the nipple.7Tightening torque: 24 NmRefit the level plug.8DANGERMake sure all safety requirements are metwhen performing the first test run. Theseare further detailed in the section DANGER- First test run may cause injury or damage!on page 44.93HAC044266-001 Revision: - 147© Copyright 2013 ABB. All rights reserved.3 Maintenance3.4.3 Changing oil, axis-2 gearboxContinued
