Refitting the axis-5 motorThe procedures describe how to refit the motor.PreparationsNoteActionDANGERTurn off all:• electric power supply• hydraulic pressure supply• air pressure supplyto the robot, before entering the robotworking area.1xx1200001019Clean the contact surfaces from any con-tamination including the recess for the o-ring.2O-ring, 3HAB3772-107Check the o-ring.3Replace if damaged.Lubricate the o-ring with some grease.4Continues on next page3HAC044266-001 Revision: - 433© Copyright 2013 ABB. All rights reserved.4 Repair4.7.5 Replacing the axis-5 motorContinued
