3.4.8 Replacing the SMB batteryNoteThe battery low alert (38213 Battery charge low) is displayed when the batteryneeds to be replaced. The recommendation to avoid an unsynchronized robotis to keep the power to the controller turned on until the battery is to be replaced.WARNINGSee instructions for batteries, WARNING - Safety risks during handling of batterieson page 48.Location of SMB batteryThe SMB battery (SMB = serial measurement board) is located on the left handside of the frame as shown in the figure below.xx1200001069Required toolsNoteArticle numberEquipmentContent is defined in section Standardtoolkit on page 559.-Standard toolkitContinues on next page3HAC044266-001 Revision: - 165© Copyright 2013 ABB. All rights reserved.3 Maintenance3.4.8 Replacing the SMB battery
