NoteActionxx1300000659Remove the guide pins and fit the two re-maining M12 screws.10M12, tightening torque: 115 NmSecure the remaining two M12 screws.11Refitting the cable harness - upper armNoteActionxx1300000541Refit the metal clamp on top of the armhouse.1xx1300000543Refit the arm house metal clamp.2Make sure that the cable loop is intact. Ifnot, arrange the cables into a loop betweenthe cable clamps in the upper arm, asshown in the figure.NoteThe variant with a long upper arm does nothave a loop.3Continues on next page3HAC044266-001 Revision: - 261© Copyright 2013 ABB. All rights reserved.4 Repair4.5.1 Replacing the upper armContinued
