NoteArt. no.EquipmentContent is defined in section Standardtoolkit on page 559.-Standard toolkitLifting the robot with fork liftThis procedure details how to secure the fork lift set in order to lift the robot andmove it using fork lift ONLY!NoteActionRelease the brakes if required as detailed in thesection Manually releasing the brakes on page 82.Move robot to its shipping position!NoteNo load is permitted on the robot!1DANGERTurn off all:• electric power supply to therobot• hydraulic pressure supply tothe robot• air pressure supply to therobotBefore entering the robot workingarea.2Tightening torque: 280 Nm.Fit the four fork lift pockets on thebase of the robot with its attach-ment screws.3Make sure the original screws are always used (orreplacements of equivalent quality: M20x60, quality8.8)!ABxx1300001602A Fork lift pocketB Attachment screw M20x60 quality 8.8 (2 pcsx 4).Insert fork lift forks into the pock-ets.4Continues on next page70 3HAC044266-001 Revision: -© Copyright 2013 ABB. All rights reserved.2 Installation and commissioning2.4.1 Lifting robot with fork liftContinued
