NXP Semiconductors freescale K51 Series Reference Manual

3.7.4.2 Op-amp 0 input mux connectionsThe op-amp 0 module contains multiplexers for selecting the positive and negativeinputs. The inputs to these muxes are defined as follows:Op-amp 0 minus input number Signal connection0 OP0_DM0 input signal (default)1 Reserved2 Op-amp 1 output3 CMP0 6-bit DAC output4 12-bit DAC0 output5 12-bit DAC1 Output6 VDD7 GroundOp-amp 0 positive input number Signal connection0 OP0_DP0 input signal1 Op-amp 0 output2 Op-amp 1 output3 CMP0 6-bit DAC output4 12-bit DAC0 output5 12-bit DAC1 Output6 VDD7 Ground3.7.4.3 Op-amp 1 input mux connectionsThe op-amp 1 module contains multiplexers for selecting the positive and negativeinputs. The inputs to these muxes are defined as follows:Op-amp 1 negative input number Signal connection0 OP1_DM0 input signal1 Op-amp 0 output2 OP1_DM1 input signal13 CMP0 6-bit DAC output4 12-bit DAC0 output5 TRI0_OUT/OP1_DM2 input signal26 VDD7 GroundChapter 3 Chip ConfigurationK51 Sub-Family Reference Manual, Rev. 6, Nov 2011Freescale Semiconductor, Inc. 119