Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version8.3.12.0Introduced on the S4810.Version 7.5.1.0 Added support for IPv6 ISIS.Version 6.3.1.0 Introduced.UsageInformationBGP to IS-IS redistribution supports “match” options using route maps. You can setthe metric value, level, and metric-type of redistributed routes by the redistributioncommand. You can “set” more advanced options using route maps.Example FTOS(conf)#router isFTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32metric-typeexternal route-map rmap-isis-to-bgpFTOS(conf-router_bgp)#show running-config isis!router isisredistribute bgp 1 level-1 metric 32 metric-type externalroute-maprmap-isis-to-bgpredistribute ospfRedistribute routing information from an OSPF process.S4810Syntax redistribute ospf process-id [level-1| level-1-2 | level-2][match {internal | external}] [metric metric-value] [metric-type {external | internal}] [route-map map-name]To return to the default values, use the no redistribute ospf process-id[level-1| level-1-2 | level-2] [match {internal | external}][metric metric-value][metric-type {external | internal}][route-map map-name] command.Parameters process-id Enter a number that corresponds to the OSPF process ID tobe redistributed. The range is from 1 to 65355.metric metric-value(OPTIONAL) The value used for the redistributed route. Use ametric value that is consistent with the destination protocol.The range is from 0 to 16777215. The default is 0.1004 Intermediate System to Intermediate System (IS-IS)
