aux 0 Enter the keywords aux 0 to reset the auxiliary port.console 0 Enter the keywords console 0 to reset the console port.vty number Enter the keyword vty then a number to clear a terminalline. The range is from 0 to 9.CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series Original command.configureEnter CONFIGURATION mode from EXEC Privilege mode.S4810Syntax configure [terminal]Parameters terminal (OPTIONAL) Enter the keyword terminal to specify thatyou are configuring from the terminal.CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Control and Monitoring 95
