> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -ialias | moreIF-MIB::ifAlias.134530304 = STRING: This is a port connectedto Router2. Thisis a port connected toIF-MIB::ifAlias.134792448 = STRING:!------command run on Dell Networkingswitch: --------------!Dell#snmp ifmib ifalias long!------command run on server connected to switch:--------------!> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -ialias | moreIF-MIB::ifAlias.134530304 = STRING: This is a port connectedto Router2. Thisis a port connected to Router2. This is a port connected toRouter2. This is aport connected to Router2. This is a port connected to Router2.IF-MIB::ifAlias.134792448 = STRING:Dell#configsnmp-server communityConfigure a new community string access for SNMPv1 v2 and v3.S4810Syntax snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-name [ipv6 ipv6-access-list-name | access-list-name| security-name name] | security-name name [ipv6 ipv6-access-list-name | access-list-name | security-name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name |security-name name]]]To remove access to a community, use the no snmp-server communitycommunity-string {ro | rw} [security-name name [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command.Parameters community-nameEnter a text string (up to 20 characters long) to act as apassword for SNMP.ro Enter the keyword ro to specify read-only permission.rw Enter the keyword rw to specify read-write permission.ipv6 access-list-name(Optional) Enter the keyword ipv6 then an IPv6 ACL name (astring up to 16 characters long).security-namename(Optional) Enter the keywords security-name then thesecurity name as defined by the community MIB.access-list-name(Optional) Enter a standard IPv4 access list name (a string upto 16 characters long).Simple Network Management Protocol (SNMP) and Syslog 1559
