67Virtual Router Redundancy Protocol(VRRP)Virtual router redundancy protocol (VRRP) is supported by the Dell Networking operating system on theS4810 platform.IPv4 VRRP CommandsThe following are IPv4 VRRP commands.advertise-intervalSet the time interval between VRRP advertisements.S4810Syntax advertise-interval {seconds | centisecs centisecs }To return to the default settings, use the no advertise-interval command.Parameters seconds Enter a number of seconds. The range is from 1 to 255. Thedefault is 1 second.centisecscentisecsEnter the keyword centisecs followed by the number ofcentisecs in multiple of 25 centisecs. The range is 25 to4075 centisecs in multiples of 25 centisecs.Defaults 1 second or 100 centisecs.CommandModesINTERFACE-VRRPCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.5(0.0) Added support for centisecs on the Z9000, S6000, S4820T,S4810, and MXL.Version 9.2(1.0) Introduced on the Z9500.Version 9.0.2.0 Introduced on the S6000.1736 Virtual Router Redundancy Protocol (VRRP)
