ftp-server enableEnable FTP server functions on the system.S4810Syntax ftp-server [vrf vrf-name] enableParameters vrf vrf-name Enter the keyword vrf and then the name of the VRF toenable the FTP server to listen to that VRF instance.NOTE: Use this attribute to specify the VRF that is usedby the FTP server to accept client connections. If no VRFis specified, then the default VRF is used.Defaults DisabledCommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.4.(0.0)Added support for VRF.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series Original command.Example morpheus% ftp 10.31.1.111Connected to 10.31.1.111.220 Dell (1.0) FTP server readyName (10.31.1.111:dch): dch331 Password requiredPassword:230 User logged inftp> pwd257 Current directory is "flash:"ftp> dir200 Port set okay150 Opening ASCII mode data connectionControl and Monitoring 105
