Group Address Interface Mode Uptime Expires Last Reporter225.0.0.0 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Member Ports: Po 2*225.0.0.1 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Member Ports: Po 2*225.0.0.2 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Member Ports: Po 2*225.0.0.3 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Member Ports: Po 2*225.0.0.4 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Member Ports: Po 2*show ip igmp interfaceView information on the interfaces participating in IGMP.S4810Syntax show ip igmp interface [interface]Parameters interface (OPTIONAL) Enter the interface type and slot/portinformation:• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.• For a Loopback interface, enter the keyword loopbackthen a number from 0 to 16383.• For a 100/1000 Ethernet interface, enter the keywordgigabitethernet followed by the slot/portinformation.• For a 1-Gigabit Ethernet interface, enter the keywordgigabitethernet followed by the slot/portinformation.• For a 10-Gigabit Ethernet interface, enter the keywordtengigabitethernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a VLAN interface, enter the keyword vlan then anumber from 1 to 4094.CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Internet Group Management Protocol (IGMP) 723
