-- Fan Status --Unit Bay TrayStatus Fan0 Speed Fan1 Speed------------------------------------------------------------------------------------0 0 up up 7021 up 70210 1 up up 6971 up 70720 2 up up 7021 up 6971Speed in RPMDell#show environment pem-- Power Supplies --Unit Bay Status Type FanStatus FanSpeed(rpm)---------------------------------------------------------------------------0 0 down UNKNOWN down 00 1 up AC up 6504Dell#show environment thermal-sensor-- Thermal Sensor Readings (deg C) --Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5Sensor6-----------------------------------------------------------------------------------0 39 36 37 37 3131 46show inventoryDisplay the S-Series or Z-Series switch type, components (including media), and Dell NetworkingOperating System (OS), including hardware identification numbers and configured protocols.S4810Syntax show inventory [media slot]Parameters media slot (OPTIONAL) Enter the keyword media then the stack ID ofthe stack member for which you want to display pluggablemedia inventory.NOTE: This parameter is available but not supported inDell Networking Operating System version 8.3.11.4.Because stacking is not supported, if you use thisparameter, the output displays “Media not present oraccessible” (refer to the Usage Information section).Defaults none136 Control and Monitoring
