mac learning-limit mac-address-stickyMaintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.S4810Syntax mac learning-limit mac-address-stickyTo convert the sticky MAC addresses to dynamic MAC addresses, use the no maclearning-limit command.Parameters mac-address-stickyConfigures the dynamic MAC addresses as sticky on aninterface.Defaults noneCommandModesINTERFACECommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version8.3.12.0Introduced on the S4810.UsageInformationIf you configure mac-learn-limit and the sticky MAC feature is enabled,dynamically learned MAC addresses are converted to sticky for that port. Any newMAC address that is learned also becomes sticky for that port.RelatedCommandsshow mac learning-limit — displays the details of the mac learning-limit.mac learning-limit station-move-violationSpecify the actions for a station move violation.S4810Syntax mac learning-limit station-move-violation {log | shutdown-both| shutdown-offending | shutdown-original}To disable a configuration, use the no mac learning-limit station-move-violation command, then the configured keyword.1036 Layer 2
