Version 9.0.2.0 Introduced on the S6000.Version 9.2(0.0) Introduced on the M I/O Aggregator. This command issupported in Programmable-Mux (PMUX) mode only.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series legacycommandRelatedCommandsclear logging — clears the logging buffer.default logging console — returns the logging console parameters to the defaultsetting.show logging — displays the logging setting and system messages in the internalbuffer.logging extendedLogs security and audit events to a system log server.Syntax logging extendedDefaults noneCommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.UsageInformationThis command is available with or without RBAC enabled. When RBAC is enabledyou can restrict access to audit and security logs based on the CLI sessions’ userroles. If extended logging is disabled, you can only view system events, regardlessof RBAC user role.When you enabled RBAC and extended logging:• Only the system administrator role can execute this command.1588 Simple Network Management Protocol (SNMP) and Syslog
