CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the C-Series and S-Series.show ip dhcp serverDisplay the DHCP server statistics.S4810Syntax show ip dhcp server statisticsDefaults noneCommandModesEXEC PrivilegeCommandHistory Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the C-Series and S-Series.Commands to Configure Secure DHCPDHCP, as defined by RFC 2131, provides no authentication or security mechanisms. Secure DHCP is asuite of features that protects networks that use dynamic address allocation from spoofing and attacks.arp inspectionEnable dynamic arp inspection (DAI) on a VLAN.S4810Syntax arp inspectionDynamic Host Configuration Protocol (DHCP) 621
