tracerouteView a packet’s path to a specific device.S4810Syntax traceroute {host | vrf instance | ip-address | ipv6-address}Parameters host Enter the name of device.ip-address Enter the IP address of the device in dotted decimal format.ipv6-address Enter the IPv6 address, in the x:x:x:x::x format, to which youare testing connectivity.NOTE: The :: notation specifies successive hexadecimalfields of zeros.Defaults • Timeout = 5 seconds• Probe count = 3• 30 hops max• 40 byte packet size• UDP port = 33434CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version 9.0.0.0 Introduced on the Z9000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 8.2.1.0 Introduced on the E-Series ExaScale with IPv6.Version 8.1.1.0 Introduced on the E-Series ExaScale (IPv4 only).Version 7.9.1.0 Introduced VRF.Version 7.6.1.0 Added support for the S-Series.Version 7.5.1.0 Introduced on the C-Series.160 Control and Monitoring
