Parameters ip-address Enter an IP address in dotted decimal format of the network.mask Enter the mask of the IP address in the slash prefix lengthformat (for example, /24).The mask appears in command outputs in dotted decimalformat (A.B.C.D).Defaults Not configured.CommandModesROUTER BGPCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.UsageInformationAlthough Dell Networking OS does not generate a route due to the backdoorconfig, there is an option for injecting/sourcing a local route in the presence ofnetwork backdoor config on a learned route.redistributeRedistribute routes into BGP.S4810Syntax redistribute {connected | static} [route-map map-name]To disable redistribution, use the no redistribution {connected | static}command.Parameters connected Enter the keyword connected to redistribute routes fromphysically connected interfaces.static Enter the keyword static to redistribute manuallyconfigured routes.These routes are treated as incomplete routes.442 Border Gateway Protocol
