vlan-name Enter the keywords vlan-name to advertise the vlan-nameTLV. This keyword is only supported on the C-Series and S-Series.Defaults Disabled.CommandModesCONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.7.1.0 Introduced on the S-Series. Added the vlan-name option.Version 7.6.1.0 Introduced on the C-Series.Version 7.4.1.0 Introduced on the E-Series.RelatedCommandsprotocol lldp (Configuration) — enables LLDP globally.debug lldp interface — debugs LLDP.show lldp neighbors — displays the LLDP neighbors.advertise dot3-tlvAdvertise dot3 TLVs (Type, Length, Value).S4810Syntax advertise dot3-tlv {max-frame-size}To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size} command.Parameters max-frame-sizeEnter the keywords max-frame-size to advertise the dot3maximum frame size.Defaults noneCommandModesCONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)Link Layer Discovery Protocol (LLDP) 1069
