Field Description• 1 = default Designated Router priority (use the ip pimdr-priority command)• DR = Designated Router• S = Sparse modeExample Dell#show ip pim neighborNeighbor Interface Uptime/Expires Ver DRAddress Prio/Mode127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / SDell#show ip pim rpView all multicast groups-to-RP mappings.S4810Syntax show ip pim rp [mapping | group-address]Parameters mapping (OPTIONAL) Enter the keyword mapping to display themulticast groups-to-RP mapping and information on howRP is learnt.group-address (OPTIONAL) Enter the multicast group address mask indotted decimal format to view RP for a specific group.CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.8.1.0 Introduced on the S-Series.Example Dell#sh ip pim rpGroup RP224.2.197.115 165.87.20.4PIM-Sparse Mode (PIM-SM) 1287
