RelatedCommandsclass-map — identifies the class map.show qos dot1p-queue-mappingDisplays the dot1p priority to queue mapping on the switch.S4810Syntax show qos dot1p-queue-mappingDefaults • dot1p Priority: 0 1 2 3 4 5 6 7• Queue: 2 0 1 3 4 5 6 7CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.RelatedCommandsservice-class dot1p-mapping — Identifies the class map.show qos policy-mapView the QoS policy map information.S4810Syntax show qos policy-map {summary [interface] | detail}Parameters summaryinterfaceTo view a policy map interface summary, enter the keywordsummary and optionally one of the following keywords andslot/port or number information:• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.Quality of Service (QoS) 1359
