Dell(conf-if-te-0/5)#Dell#Example(S6000)Dell#S6000#show versionDell Real Time Operating System SoftwareDell Operating System Version: 2.0Dell Application Software Version: 9-4(0-119)Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.Build Time: Tue Mar 18 10:32:02 PDT 2014Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/SRCCDell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)System image file is "DT-MAA-S6000-16-PI"System Type: S6000Control Processor: Intel Centerton with 3203911680 bytes ofmemory, core(s) 2.16G bytes of boot flash memory.1 32-port TE/FG (SI)32 Forty GigabitEthernet/IEEE 802.3 interface(s)upgradeUpgrade the bootflash image or system image of the management unit.S4810Syntax upgrade {boot | system} {ftp: | scp: | tftp: | flash: {A: |B:}| stack-unit | usbflash | slot0:} file-urlParameters boot Enter the keyword boot to change the boot image.system Enter the keyword system to change the system image.ftp: After entering the keyword ftp:, you can either follow itwith the location of the source file in this form: //userid:password@hostip/filepath or press Enter tolaunch a prompt sequence.scp: After entering the keyword scp:, you can either follow itwith the location of the source file in this form: //userid:password@hostip/filepath or press Enter tolaunch a prompt sequence.slot0: After entering the keyword slot0:, you can either follow itwith the location of the source file in this form: //hostlocation/filepath or press Enter to launch aprompt sequence.tftp: After entering the keyword tftp:, you can either follow itwith the location of the source file in this form: //hostlocation/filepath or press Enter to launch aprompt sequence.88 File Management
