Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series legacycommand.UsageInformationIGMP commands accept only non-VLAN interfaces — specifying VLAN does notyield results.Example Dell#show ip igmp interfaceGigabitEthernet 0/0 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/5 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/6 is down, line protocol is downInternet protocol processing disabledGigabitEthernet 0/7 is up, line protocol is downInternet protocol processing disabledGigabitEthernet 7/9 is up, line protocol is upInternet address is 10.87.5.250/24IGMP is enabled on interfaceIGMP query interval is 60 secondsIGMP querier timeout is 120 secondsIGMP max query response time is 10 secondsIGMP last member query response interval is 1000 msIGMP activity: 0 joins, 0 leavesIGMP querying router is 10.87.5.250 (this system)IGMP version is 2show ip igmp ssm-mapDisplay is a list of groups that are currently in the IGMP group table and contain SSM mapped sources.S4810Syntax show ip igmp ssm-map [group]Parameters group (OPTIONAL) Enter the multicast group address in the formA.B.C.D to display the list of sources to which this group ismapped.CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.724 Internet Group Management Protocol (IGMP)
