Version8.3.19.0Introduced on the S4820T.Version 8.3.11.0 Introduced on the Z9000.Version 8.3.8.0 Introduced on the S4810.RelatedCommandsneighbor add-path — specifies that this neighbor/peer group can send/receivemultiple path advertisements.bgp always-compare-medAllows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from differentexternal ASs.S4810Syntax bgp always-compare-medTo disable comparison of MED, enter no bgp always-compare-med.Defaults Disabled (that is, the software only compares MEDs from neighbors within thesame AS).CommandModesROUTER BGPCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced command.Version 7.7.1.0 Introduced on the C-Series.UsageInformationAny update without a MED attribute is the least preferred route.If you enable this command, use the clear ip bgp * command to recomputethe best path.Border Gateway Protocol 377
