clear ip pim tibClear PIM tree information from the PIM database.S4810Syntax clear ip pim tib [group]Parameters group (OPTIONAL) Enter the multicast group address in dotteddecimal format (A.B.C.D).CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.8.1.0 Introduced on the S-Series.UsageInformationIf you use this command on a local VLT node, all multicast routes from the localPIM TIB, the entire multicast route table, and all the entries in the data plane aredeleted. The local VLT node sends a request to the peer VLT node to downloadmulticast routes learned by the peer. Both local and synced routes are removedfrom the local VLT node multicast route table. The peer VLT node clears syncedroutes from the node.If you use this command on a peer VLT node, only the synced routes are deletedfrom the multicast route table.debug ip pimView IP PIM debugging messages.S4810Syntax debug ip pim [bsr | events | group | packet [in | out] |register | state | timer [assert | hello | joinprune |register]]1270 PIM-Sparse Mode (PIM-SM)
