The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version 9.0.0.0 Introduced on the Z9000.Version8.3.19.0Introduced on the S4820T.Version 8.3.8.0 Introduced on the S4810.Example Dell# Dell(conf-if-vl-100)#show vlt detailLocal LAG Id Peer LAG Id Local Status Peer Status Active VLANs------------ ----------- ------------ -------------------------10 10 UP UP 100, 200, 300,400,show vlt inconsistencyDisplay run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes.S4810Syntax show vlt inconsistency ip mrouteCommandModesEXECCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version 9.2(0.0) Introduced on the M I/O Aggregator. This command issupported in Programmable-Mux (PMUX) mode only.Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.Example Dell#show vlt inconsistency ip mrouteSpanned Multicast Routing IIF InconsistencyMulticast Route LocalIIF PeerIIF--------------- ---------- ---------(22.22.22.200, 225.1.1.2) VLAN 5 VLAN 6(*, 225.1.1.2) VLAN 15 te 0/5Dell#1726 Virtual Link Trunking (VLT)