64Virtual Routing and Forwarding (VRF)Virtual Routing and Forwarding (VRF) allows multiple instances of a routing table to co-exist on the samerouter at the same time. Virtual Routing and Forwarding (VRF) is supported on the S-Series platforms.ip vrfCreates a customer VRF.S4810Syntax ip vrf {vrf-name | management} [vrf_id]To delete a customer VRF, use the no ip vrf {vrf-name | management}[vrf_id] command.Parameters vrf-name Enter the name of the VRF that you want to create.management Use this keyword when you want to create the managementVRF.vrf_id Enter the ID of the VRF that you want to create.Defaults Available by default for management VRF. For creating other customer VRFs, thefeature vrf option in config mode must be enabled.CommandModesCONFIGCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.4(0.0) Introduced on the S4810 and S4820T.UsageInformationUse this command to create or delete a customer VRF. You cannot use thekeyword default as a VRF name as it indicates a special VRF. Use the keywordmanagement to create a management VRF. You need not provide a VRF ID whilecreating a management VRF. For other types of VRFs, VRF ID is an optionalparameter. All values in the valid range that are not already taken are allowed.Virtual Routing and Forwarding (VRF) 1701
