ip ip-address Enter the keyword ip then the IP address that the server isleasing.interface type Enter the keyword interface then the type of interface towhich the host is connected.• For an 10/100 Ethernet interface, enter the keywordfastethernet.• For a ten-Gigabit Ethernet interface, enter the keywordtengigabitethernet.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE.slot/port Enter the slot and port number of the interface.lease time Enter the keyword lease then the amount of time the IPaddress is leased. The range is from 1 to 4294967295.Defaults noneCommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the C-Series and S-Series.RelatedCommandsshow ip dhcp snooping — displays the contents of the DHCP binding table.ip dhcp snooping databaseDelay writing the binding table for a specified time.S4810Syntax ip dhcp snooping database write-delay minutes1524 Security
