Line BeginningWithDescriptionTotal MAC... Lists the total number of MAC addresses the switch uses.Example(Count)Dell# show mac-address-table countMAC Entries for all vlans :Dynamic Address Count : 110Static Address (User-defined) Count : 0Sticky Address Count : 0Total Synced Mac from Peer(N): 100Total MAC Addresses in Use: 110Dell#RelatedCommandsshow mac-address-table aging-time — displays MAC aging time.show mac-address-table aging-timeDisplay the aging times assigned to the MAC addresses on the switch.S4810Syntax show mac-address-table aging-time [vlan vlan-id]Parameters vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID todisplay the MAC address assigned to the VLAN. The range isfrom 1 to 4094.CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.3.1.0 Added the vlan option on the E-Series.Version 7.7.1.0 Introduced on the C-Series and S-Series.pre-Version6.2.1.1Introduced on the E-Series.1044 Layer 2
