Parameters detail Display a detailed description of the selected IPv6 prefix list.prefix-list name Enter the name of the prefix list.NOTE: There is a 140-character limit for prefix listnames.summary Display a summary of RPF routes.CommandModesEXECCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant FTOS Command Line Reference Guide.The following is a list of the FTOS version history for this command.Version 9.0.0.0 Introduced on the Z9000.Version8.3.10.0Introduced on the S4810.RelatedCommandsipv6 prefix-list — configures an IPv6 prefix-list.IPv6 MBGP CommandsMultiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout theinternet and connecting multicast topologies between BGP and autonomous systems (AS). FTOS MBGP isimplemented as per IETF RFC 1858.show ipv6 mbgproutesDisplay the selected IPv6 MBGP route or a summary of all MBGP routes in the table.S4810Syntax show ipv6 mbgproutes ipv6-address prefix-length | summaryParameters ipv6-addressprefix-length(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x formatthen the prefix length in the /x format. The range is from /0to /128.NOTE: The :: notation specifies successive hexadecimalfields of zeros.summary Display a summary of RPF routes.Border Gateway Protocol 495
