49Rapid Spanning Tree Protocol (RSTP)The Dell Networking operating software implementation of rapid spanning tree protocol (RSTP) is basedon the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivitythroughout a bridged local area network (LAN) that is comprised of LANs interconnected by bridges.Dell Networking OS supports RSTP on the S4810 platform.bridge-prioritySet the bridge priority for RSTP.S4810Syntax bridge-priority priority-valueTo return to the default value, use the no bridge-priority command.Parameters priority-value Enter a number as the bridge priority value in increments of4096. The range is from 0 to 61440. The default is 32768.Defaults 32768CommandModesCONFIGURATION RSTP (conf-rstp)CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.2.1.1 Introduced on the E-Series.1424 Rapid Spanning Tree Protocol (RSTP)
