pre-Version6.1.1.0Introduced on the E-Series.UsageInformationDebug information includes details for key-exchange, authentication, andestablished session for each connection.ip scp topdirIdentify a location for files used in secure copy transfer.S4810Syntax ip scp topdir directoryTo return to the default setting, use the no ip scp topdir command.Parameters directory Enter a directory name.Defaults The internal flash (flash:) is the default directory.CommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.UsageInformationTo configure the switch as an SCP server, use the ip ssh server command.RelatedCommandsip ssh server — enables the SSH and SCP server on the switch.Security 1503
