CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the C-Series and S-Series.Version 7.4.1.0 Introduced on the E-Series.RelatedCommandsinterface range — configures a range of interfaces.dot1x port-controlEnable port control on an interface.S4810Syntax dot1x port-control {force-authorized | auto | force-unauthorized}Parameters force-authorizedEnter the keywords force-authorized to forciblyauthorize a port.auto Enter the keyword auto to authorize a port based on the802.1X operation result.force-unauthorizedEnter the keywords force-unauthorized to forcibly de-authorize a port.Defaults noneCommandModesINTERFACECommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Security 1493
