vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to4094.CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Added support for sticky MAC addresses.Version 8.3.11.1 Introduced on the Z9000.Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.1.1.1 Introduced on the E-Series.mac-address-table aging-timeSpecify an aging time for MAC addresses to remove from the MAC address table.S4810Syntax mac-address-table aging-time secondsParameters seconds Enter either zero (0) or a number as the number of secondsbefore MAC addresses are relearned. To disable aging of theMAC address table, enter 0. The range is from 10 to1000000. The default is 1800 seconds.Defaults 1800 secondsCommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Layer 2 1029
