Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.1.1.0Introduced on the E-Series.RelatedCommandsmatch interface — redistributes routes that match the next-hop interface.match ip address — redistributes routes that match an IP address.match ip next-hop — redistributes routes that match the next-hop IP address.match ip route-source — redistributes routes that match routes advertised by otherrouters.match metric — redistributes routes that match a specific metric.match route-type — redistributes routes that match a route type.route-mapEnable a route map statement and configure its action and sequence number. This command also placesyou in ROUTE-MAP mode.S4810Syntax route-map map-name [permit | deny] [sequence-number]To delete a route map, use the no route-map map-name [permit | deny][sequence-number] command.Parameters map-name Enter a text string of up to 140 characters to name the routemap for easy identification.permit (OPTIONAL) Enter the keyword permit to set the route mapdefault as permit. If you do not specify a keyword, the defaultis permit.deny (OPTIONAL) Enter the keyword deny to set the route mapdefault as deny.sequence-number(OPTIONAL) Enter a number to identify the route map forediting and sequencing with other route maps. You areAccess Control Lists (ACL) 281
