RelatedCommandsshow ip cam stack-unit – Display content-addressable memory (CAM) entries foran S-Series switch.link-bundle-monitor enableProvides a mechanism to enable monitoring of traffic distribution on an ECMP link bundle.S4810Syntax link-bundle-monitor enableTo exit from ECMP group mode, use the exit command.CommandModes • ECMP-GROUP• PORT-CHANNEL INTERFACECommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version 9.0.0.0 Introduced on the Z9000.Version8.3.19.0Introduced on the S4820T.Version8.3.10.0Introduced on the S4810.link-bundle-distribution trigger-thresholdProvides a mechanism to set the threshold to trigger when traffic distribution begins being monitored onan ECMP link bundle.S4810Syntax link-bundle-distribution trigger-threshold [percent]To exit from ecmp group mode, use the exit command.Parameters percent Indicate the threshold value when traffic distribution startsbeing monitored on an ECMP link bundle. The range is from1 to 90%. The default is 60%.644 Equal Cost Multi-Path (ECMP)
