Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.Example Dell#show crypto ipsec transform-setTransform-Set Name : dallasTransform-Set refCnt : 0AH Transform :ESP Auth Transform :ESP Encry Transform : 3desDell#show crypto ipsec policyDisplay the crypto policy configuration.S4810Syntax show crypto ipsec policyCommandModesEXECCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.Example Dell(conf-crypto-policy)#do show crypto ipsec policyPolicy name : pol1Policy refcount : 0Sequence Num : 1SA Mode : IPSEC-MANUALTransform-Set Name :Peer IP Address :Inbound AH SPI : 0Inbound ESP Auth SPI : 0Inbound ESP Encry SPI : 0Inbound AH Key : [0]::Inbound ESP Auth Key : [0]::Inbound ESP Encry Key : [0]::Outbound AH SPI : 0Outbound ESP Auth SPI : 0Outbound ESP Encry SPI: 0Outound AH Key : [0]::Outound ESP Auth Key : [0]::Outound ESP Encry Key : [0]::Match sequence Num : 2Protocol type : tcpIP or IPv6 : IPSource address : 1.1.1.1Internet Protocol Security (IPSec) 829
