Layer 2 Overhead Link MTU and IP MTU DeltaEthernet(untagged)18 bytesVLAN Tag 22 bytesUntagged Packetwith VLAN-StackHeader22 bytesTagged Packetwith VLAN-StackHeader26 bytesportmode hybridTo accept both tagged and untagged frames, set a physical port or port-channel. A port configured thisway is identified as a hybrid port in report displays.S4810Syntax portmode hybridTo return a port to accept either tagged or untagged frames (non-hybrid), use theno portmode hybrid command.Defaults non-hybridCommandModesINTERFACE (conf-if-interface-slot/port)CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.UsageInformationThe following describes the interface command shown in the followingexample. This example sets a port as hybrid, makes the port a tagged member ofVLAN 20, and an untagged member of VLAN 10, which becomes the native VLANof the port. The port now accepts:Interfaces 763
