Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.ipv6 nd dns-serverConfigures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements toan IPv6 device.Syntax ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}To remove the IPv6 RDSS configuration, use no ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}Parameters ipv6-RDNSS-addressEnter the IPv6 Recursive DNS Server’s (RDNSS) address. Youcan specify up to 4 IPv6 RDNSS server addresses.lifetime Enter the lifetime in seconds. The amount of time the IPv6host can use the IPv6 RDNSS address for name resolution.The range is 0 to 4294967295 seconds. When you specifythe maximum lifetime value of 4294967295 or infinite,the lifetime does not expire. A value of 0 indicates to the hostthat the RDNSS address should not be used. You mustspecify a lifetime using the lifetime or infiniteparameter.infinite Enter the keyword infinite to specify that the RDNSSlifetime does not expire.Defaults Not ConfiguredCommandModesINTERFACE CONFIGCommandHistory Version 9.5(0.0) Added support for roles on the Z9000.Added support for roles on the S6000.Added support for roles on the S4820T.Added support for roles on the S4810.Added support for roles on the MXL.UsageInformationUse this command to add, edit, or delete an IPv6 RDNSS address and lifetime value.You can configure up to four IPv6 RDNSS addresses. You must specify a lifetimeusing the lifetime or infinite parameter.926 IPv6 Basics
