Version 8.3.7.0 Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 7.7.1.0 Introduced on the S-Series.RelatedCommands • reload – reboots Dell Networking OS.stack-unit provisionPreconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that isexecuted on the management unit.S4810Syntax stack-unit [stack-unit] provision {S25N|S25P|S25V|S50N|S50V|Z9000|S4810|S4820T}Parameters stack-unit Enter a stack member identifier of the switch that you wantto add to the stack.S25N|S25P|S25V|S50N|S50V|Z9000|S4810|S4820TEnter the model identifier of the switch to be added as astack member. This identifier is also referred to as theprovision type.Defaults When this value is not set, a switch joining the stack is given the next availablesequential stack member identifier.CommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 8.3.11.1 Introduced on the Z9000.Version8.3.19.0Introduced on the S4820T.Version 8.3.7.0 Introduced on the S4810.Version 7.7.1.0 Introduced on the S-Series.RelatedCommands • reload – reboots Dell Networking OS.Stacking 1615
